Nissan Publications

CONSULT Diagnostic Software Updates

CONSULT-III plus/CONSULT 4 CONSULT 4 R2RCONSULT-III plus R2RCONSULT-IIGTR

CONSULT-III plus Diagnostic Software (Version: 251.10.00)

CONSULT-III Plus provides diagnostic and programming support for Nissan vehicles from 1995 MY onward, except for those covered by bulletin NTB06-040, which require CONSULT-II. CONSULT-III plus software must be used with a Nissan Vehicle Interface (J-47446-VI2-B or J-52925-VI3).

CONSULT 4 Diagnostic Software

C4 does not replace CONSULT-III plus, which remains necessary for all other models. C4 runs on the same PC and requires the Nissan Vehicle Interface (NI-52925-VI3). C4 applies the following Nissan vehicles:

2023 MY and newer ARIYA
2024 MY and newer Rogue
2025 MY and newer Kicks, Murano, and Armada
2026 MY and newer Sentra

Purchasing Diagnostic Software

	1 year subscription ($1950). CONSULT-III Plus software
	1 year subscription ($2375). CONSULT-III Plus software with GTR

	1 year subscription ($3875). CONSULT-III Plus & CONSULT 4 software
	1 year subscription ($4250). CONSULT-III Plus & CONSULT 4 & GTR software

CONSULT-III plus Information

	CONSULT-III plus Operation Manual - click here
	Nissan and Infiniti update CONSULT-III Plus diagnostic software quarterly with new models and fixes. Users should install the latest version before vehicle connection. Subscribers can download updates as released.
	CONSULT PC and vehicle interface can be purchased by contacting TechMate at www.techmatetools.com
	Hardware Requirements - click here
	VI3 Operational Guide - click here
	Login Instructions - click here

CONSULT 4 Information

	CONSULT 4 Operation Manual - click here
	Hardware Requirements - click here
	VI3 Operational Guide - click here
	Login Instructions - click here
	CONSULT 4 Install Guide - click here
	CONSULT 4 FAQ - click here

CONSULT 4 R2R Diagnostic Software

The CONSULT 4 R2R diagnostic software can be installed on any personal computer that meets CONSULT 4 R2R software operating specifications and can be used with the J2534 device listed below. See system requirements below. Click the below link to purchase a diagnostic software subscription.

Click the below link to purchase a diagnostic software subscription.

	1 day subscription - ($50.00) CONSULT 4 R2R Software.
	30 day subscription - ($250.00) CONSULT 4 R2R Software.
	1 year subscription - ($2,500.00) CONSULT 4 R2R Software.

If you have purchased the CONSULT 4 R2R diagnostic software, you may download the application from yourdownload page

System Requirements:

Click here for Minimum System Requirements

Validated Devices

OPUS IVS CarDAQ Plus 3 (Driver & firmware version 1.2.49 or newer)
OPUS IVS Mongoose-Plus Wired (Driver & firmware version1.0.70.0 or newer)
TOPDON RLink Lite, RLink X7 and RLink J2534

CONSULT 4 R2R Diagnostic System Information:

The software provides full diagnostic functionality for the following Nissan and INFINITI models: 2023 and newer ARIYA, 2024 and newer Rogue, 2025 and newer Kicks, Murano, Armada, and QX80, 2026 and newer Leaf and Sentra.
Software does not support Immobilizer diagnosis. Immobilizer diagnosis can be completed by authorized and registered Security Professionals using CONSULT-III plus/CONSULT 4 plus software subscription.

CONSULT 4 Guides

	CONSULT 4 Operation Manual - click here
	CONSULT 4 Install Guide - click here
	CONSULT 4 Login Instructions - click here

Support

	OPUS IVS CarDAQ Plus & Mongoose-Plus set-up guide - click here
	Updated driver Driver & firmware (Set-Up) and user manual for CarDAQ Plus & Mongoose-Plus Nissan2 Wired - click here
	OPUS Tech Support for device set-up: Call 1-877-888-2534. Select opt. 1, then opt. 2.
	TOPDON Set-up Guide – click here
	TOPDON Support for device set-up: Call 833-629-4832 or click Support Ticket or click RLink Support Page.

CONSULT-III plus R2R Diagnostic Software 753

The generic CONSULT-III plus (C-III plus) R2R diagnostic software can be installed on any off-the-shelf personal computer that meets C-III plus software operating specifications and can be used with a compliant SAE J2534 device. See system requirements below.

Click the below link to purchase a diagnostic software subscription.

	1 day subscription - ($55.00) C-III plus R2R Software.
	1 day subscription - ($125.00) C-III plus R2R Software with GTR software (version 51.20).
	30 day subscription - ($250.00) C-III plus R2R Software.
	30 day subscription - ($500.00) C-III plus R2R Software with GTR software (version 51.20).
	1 year subscription - ($1,250.00) C-III plus R2R Software.
	1 year subscription - ($1,575.00) C-III plus R2R Software with GTR software (version 51.20).

If you have purchased the CONSULT-III plus R2R diagnostic software and you have a subscription, you may download updates from yourdownload page

Additional Information:

Download C-III plus R2R Quick Reference Manual - No Cost

Download C-III plus R2R Operation Manual - No Cost

System Requirements:

Click here for Minimum System Requirements
J2534_v05.00 API Complaint Device

OPUS IVS - Car DAQ-Plus 3
TOPDON USA – Rlink Lite, Rlink J2534, Rlink X7
LAUNCH - Smartlink

CONSULT-III plus R2R Diagnostic System Information:

Login Instructions
CONSULT-III plus Operation Manual - click here
Software supports diagnostics functionality on all Nissan and Infiniti 2018 model years or newer vehicles.
Software supports all ECU programming/reprogramming & configuration on 1999 model year and newer vehicles and 2018 model year and newer for VIN writing into ECUs.
Software does not support Immobilizer diagnosis. Immobilizer diagnosis can be completed by authorized and registered Security Professionals using CONSULT-III plus software.
It is recommended the latest version of CONSULT-III plus R2R be installed before connecting to a vehicle.
For a complete list of supported software functions view the C-III plus R2R Operation Manual.

CONSULT-II diagnostic software supports only vehicles manufactured up to 2006 model year. CONSULT-II software is no longer supported or updated.

Software is for the CONSULT-II Diagnostic Service Tool only.

Download Diagnostic Software

CONSULT II Diagnostic Software Update File (Version : UED06E)

GT-R ONLY SOFTWARE

GT-R software can be purchased from the CONSULT-III plus tab

C-III plus GT-R software supports 2009 to current model year North American market GT-Rs.

GT-R TRANSMISSION CONFIGURATION USING THE CONSULT-III plus

When the transmission or transmission control unit is replaced, the IP characteristic data must be written into the TCM. This process is called TCM configuration. If the data is not written into the replacement TCM, the transmission will not operate correctly. When the transmission is replaced, the characteristic data for the new transmission must be written into the TCM. This application requires the use of the Nissan CONSULT-III plus diagnostic software version 6.12 or above, and GT-R diagnostic software version 14.12 or above, and the GT-R diagnostic security card.

To perform TCM configuration you will need to download the “TCM configuration application” and the “TCM configuration database.

Download C-III plus TCM Config. Software (Version 2013/03/01 rev 3) .....no charge

Install the software by running “TCM_CONFIG_SETUP_FOR_C3Plus.EXE"

Download C-III plus TCM Configuration Database.....no charge

Database is updated daily so please be sure to download the latest data before trying to configure the TCM.

After downloading the database, EXTRACT the database to folder C:\CONSULT-III_plus\System\Application\ApplicationData\ATWS. From the desktop, launch the application and enter the transmission serial number into the application and select “Read and Search”. The application will automatically place the correct IP config data in the proper C-III plus location. Use “TCM Work Support” in C-III plus to write the data to the TCM.

GT-R TRANSMISSION CONFIGURATION USING THE CONSULT-III

Download C-III TCM Config. Software (version 1.0) .....no charge

When the file has downloaded, install the program by running “TCM_CONFIG_SETUP.EXE"

When the file has downloaded, EXTRACT the configuration database to the proper folder. This database must be placed in folder C:\ConsultIII\Link

Download C-III TCM Configuration Database.....no charge